ABS 0445E — is an extruded grade of general purpose with a good rigidity-hardness balance. It is used for production of sheets with high quality surface (co-extruded or not and with high extrusion ratio), applicable for refrigerators, sanitary, packaging, automobile parts, consumer goods and furniture (profiles). It is produced self-colored only, free of additives and dye.
Chemical name: Polymer of prop-2-ene nitrile with buta-1,3-diene and ethenyl benzene
Empirical formula: [ [С3Н3N]k[С4Н6]m[С8Н8]n]x
Specification: TU 2214-159-05766801-2011
| PROPERTY | Value | Test Method |
|---|---|---|
| Melt flow rate, g/10min at 2200 С per 10 kg of load | 4,0±1,5 | ASTM 1238 |
| Gloss at 600, minimum | 60 | ASTM D 523 |
| Residual styrene mass fraction, %, not more | 0,05 | ТУ2214-159-05766801-2011 |
| Izod impact strength, notched, (4,0 мм, +230C) kJ/m2, not less | 15 | ISO 180 |
| Vicat softening temperature, (50 N, 500C/h), оС, not less | 100 | ASTM 1525 |
| Reference data | ||
| Tensile strength, MPa | 45 | ASTM D638 |
| Strain at break, % | 45 | ASTM D638 |
| Flexural strength, MPa | 68 | ASTM D790 |
| Flexural modulus, MPa | 2300 | ASTM D790 |
| Charpy impact strength, notched, kJ/m2 (+230C), | 12 | DIN 53453 |
| Rockwell hardness | 110 | ISO2039/2 |
| Deflection temperature under load, 0C | 104 | ASTM D648 |
| Coefficient of linear thermal expansion, 10-5/ 0C | 9 | ASTM D696 |
| Thermal conductivity, W/(R m) | 0,17 | ASTM C177 |
| Molding shrinkage, % | 0,4-0,6 | |
| Flame behavior | НВ | UL94 |
| Glow wire test, 0C | 650 | IEC 60695-2-1 |
| Water absorption, % | 0,3 | ASTM D570 |
Product form: Pellets
Packaging:Polyethylene bags, in bulk by polymer trucks.
Transportation: All types of covered transport.
Storage: In closed room on shelves or pallets, at a distance of minimum 5 cm above the floor and at a distance of minimum 1 m from the space heaters, in conditions, excluding direct sunlight effect.
Information, stated in the specification, is submitted according to our data and is considered correct on the date of revision. This specification does not exempt the consumer from liability for checking the product correspondence to the suggested application. The producer is not responsible for any losses or damages, which can arise due to use of this information.
